II class oil separator
Features:
Oil/Water Separators are specialty tanks designed to separate free oil, grease and settleable solids from water. After separation, clean water is discharged to a storm sewer, while the separated oil is retained in the tank for proper disposal at a later time.
Class II trap represents a special container to be fitted on sewage lines (parking areas, industrial enterprises, highways) for discharging water into central networks. The trap is used to separate particles of oil and fuel from the water. Oil particles with a density less than 0.85 g/cm3 are collected into the upper layer of effluent, collected into the tank and then separated from the water and discharged for further circulation from the lower part of the tank. Class II oil traps can assure the hydrocarbons content in effluents under 100 mg/l, as required by the European Union standards EVS-EN 858-1:2002/A1:2005.
You can order oil separator with or without inbuilt sandseparator.
II class oil/water separators are at work in a variety of applications:
- Airports
- Vehicle maintenance facilities
- Railroads
- Military installations
- Parking lots
- Utilities
- Petroleum handling facilities
The major design parameters needed to choose the correct product for your application are:
- Effluent quality requirement
- Inlet flow rate
- Inlet oil concentration
- Specific gravity of product(s) to be separated
- Oil storage capacity requirement
- Temperature
- Oil spill capacity requirement